|110908|| 1996 J-80 For Sale 6/7/2016
I am retiring from racing and will not be buying a different boat.
Boat made in USA. No liens on boat or trailer. I bought the boat in NC. in 2003.
Previous owner purchased the boat in 2002. He raced it in fresh water and dry sailed the boat.
I have raced it in Lake Michigan since I bought it. It has been kept in a slip.
The only alteration from a J-80 One Design was the addition of genoa tracks.
Hull # 149, White Hull, SCRIMP, with off white deck. Well maintained boat with many upgrades.
Previous owner in 2002 had keel templated with CompuKeel templates and keel, bottom and
rudder were faired & finished with VC Performance Teflon/epoxy paint (white). All through deck
fittings were removed, balsa core routed out and holes filled with West epoxy, then deck
fittings redrilled and bedded to prevent water from reaching the balsa core of the deck; bilge was
was finished with Interlux 2000 epoxy; front hatch replaced; all gear for PHRF racing
installed including genoa tracks; stainless steel plates were custom made and installed under the
stanchion posts to insure this high stress point never causes gel coat cracks.
Boat stored inside while out of the water.
2002 Haul Rite Custom 32 Roller, galvanized roller trailer for ramp launching with winch
and tie down straps, built in ladder for climbing onto boat when in the trailer. Spare tire
Danforth anchor and rode. Fire extinguisher Tool Box
Spinlock halyard clutch for main and jib. Navigation lights changed to LEDs
Spinlock tiller extension, 2013 Tacktick Racemaster Compass with mast mount
All halyards in excellent condition. Separate sheets for jib and genoa. Two sets of spinnaker
sheets, both sets tapered, one set continuous, the other separate, Two pigtails, one with J-lock
shackle. Layline spinnaker launch bag. Four sheet bags in cockpit, battery, Windex, Main sail
cover, Lifeline cushions on upper lifelines. Lower lifelines added. Boomkicker with Harken Vang.
Harken 32 self tailing winches. Harken ratchmatic spin blocks. Twin sheet Schafer fairlead genoa blocks
Hall motor mount. 3.5 HP Nissan outboard. Garmin 72 handheld GPS can be hatch mounted.
Includes the Garmin 72 and West Marine 100 FM Handheld radio. Bulkhead compass
Winch and tiller covers. Bow cleats on tracks-removed while racing to avoid any line fouls.
2016 Dyneema backstay. Original s.s. backstay included. Batten on top of mast to hold up backstay
during tacks and gybes. Three winch handles. Four 4 inch thick foam bunk cushions with covers,
Four one inch thick foam bunk cushions with covers, Lifting straps. Loose gauge Lifting stapes, Loos model 2 gauge
Tillermaster self steering device. One can of VC 17. Man overboard light Four life harnesses
Adjustable boat hook with brush. Flares, Hand bearing compass, Bosun's chair. Dock lines
Four large fenders. Bottom painting supplies, Head, All equipment manuals.
Bushnell 7 x 50 armored binoculars Additional misc. items
Sails All are North
2005 Main 3DL Kevlar Wed night racing With Bag
Fall 2010 Main 3DL Kevlar Regatta Racing Only With Bag
2005 Genoa 3DL Aramid Wed night racing With Turtle
2008 Genoa 3DL Aramid Wed night racing With Turtle
Fall 2014 Genoa Only 5 races on it With Turtle
2008 # 3 3Dr Kevlar Not used often With Turtle
2003 Reacher 3A AirX 700/650 Heaver cloth at luff Hatch Launch Bag
2008 Runner 3A AirX Wed night racing Hatch Launch Bag
Fall 2010 Runner 3A AirX Regatta Racing Only Hatch Launch Bag
920 980 8996 ||WI ||$ 25,000 ||Mike Larson|
|110911||Hull number TSP80267J900 built in 2000, and looks much newer. Fresh water boat. Gently used for club racing on Lake Ontario. Triad dual axle trailer, 6 pads. Yamaha 4 Hp outboard. J80 class sails: North Sail mainsail 2011, North Sail spinnaker 2013 (all white), UK jib 2007. Extra mainsail, jib and spinnaker in decent shape. All the usual running rigging and safety gear included. Speed puck and Tacktick mast instruments. email: firstname.lastname@example.org||ON ||$25000 USD ||Robert Lenters|
|120910||I'm looking for a good used genoa.
Dale|| || ||Dale Robertson|
||Equipment and Accessories
|130909||2008 J/80 rudder. I bought a boat last year and it came with a custom rudder plus the original to the boat. If you need a rudder, this one is lightly used from a French built boat. Waterlines sells replacement rudders for $1,500. You can have this one for $1,100. Including rudder cover.||MA ||$1,100 ||Peter d'Anjou|