Page 1 of 1

PostPosted: Sat May 11, 2002 4:05 pm
by Guest
Anyone had to replace a stern pulpit? We got hit today and the stern pulpit suffered terribly. Any advice would be appreciated. Thanks

PostPosted: Sun May 12, 2002 6:24 pm
by Guest
nuts and bolts on the sides; self tapping screws in the rear. access the nuts on the side through the access panels in the cockpit. be careful of the stern light wire. The light needs to be completely removed first.

Hope this helps.

PostPosted: Sun May 12, 2002 11:24 pm
by Guest
Try contacting Tom Meeh of Waterline Works in Seabrook, Texas (281-474-7533). He just finished replacing a stern pushpit on one of our fleet boats with truly professional results, and I'm sure would be happy to give you some pointers. He also repaired the structural sheer damage to my hull-keel joint that occured when we hit a submerged granite block off of a jetty last summer. Subsequent to that repair we won the NA's. As they say, the proof's in the pudding...